View STN3NF06_1318806.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STN3NF06
N-CHANNEL 60V - 0.07 - 4A SOT-223 STripFETTM II POWER MOSFET
TYPE STN3NF06
s s s s
VDSS 60 V
RDS(on) < 0.1
ID 4A
TYPICAL RDS(on) = 0.07 EXCEPTIONAL dv/dt CAPABILITY 100% AVALANCHE TESTED AVALANCHE RUGGED TECHNOLOGY
2
DESCRIPTION This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature SizeTM" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. APPLICATIONS s DC-DC & DC-AC COVERTERS s DC MOTOR CONTROL (DISK DRIVERS, etc.) s SYNCHRONOUS RECTIFICATION
1
SOT-223
2
3
INTERNAL SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Symbol VDS VDGR VGS ID ID IDM(*) Ptot dv/dt
(1)
Parameter Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuous) at TC = 25C Drain Current (continuous) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Derating Factor Peak Diode Recovery voltage slope Single Pulse Avalanche Energy Storage Temperature Operating Junction Temperature
Value 60 60 20 4 2.9 16 3.3 0.026 10 200 -55 to 150
(1) ISD 4A, di/dt 150A/s, VDD V (BR)DSS, Tj T JMAX (2) Starting T j = 25 oC, ID = 4A, VDD = 30V
Unit V V V A A A W W/C V/ns mJ C
EAS (2) Tstg Tj
(*) Pulse width limited by safe operating area. December 2002
.
1/8
STN3NF06
Note: 1. THERMAL DATA
Rthj-pcb Rthj-pcb Tl
Thermal Resistance Junction-PCB (*) Thermal Resistance Junction-PCB (**) Maximum Lead Temperature For Soldering Purpose (for 10 sec. 1.6 mm from case)
Max Max Typ
38 100 260
C/W C/W C
(*) When Mounted on FR-4 board with 1 inch2 pad, 2 oz of Cu and t [ 10 sec (**) When Mounted on minimum recommended footprint
ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified) OFF
Symbol V(BR)DSS IDSS IGSS Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Test Conditions ID = 250 A, VGS = 0 VDS = Max Rating VDS = Max Rating TC = 125C VGS = 20V Min. 60 1 10 100 Typ. Max. Unit V A A nA
ON (1)
Symbol VGS(th) RDS(on) Parameter Gate Threshold Voltage Static Drain-source On Resistance Test Conditions VDS = VGS VGS = 10 V ID = 250 A ID = 1.5 A Min. 2 Typ. 3 0.07 Max. 4 0.10 Unit V
DYNAMIC
Symbol gfs (*) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VDS = 15 V ID = 1.5A Min. Typ. 3 315 70 30 Max. Unit S pF pF pF
VDS = 25V, f = 1 MHz, VGS = 0
2/8
STN3NF06
ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON
Symbol td(on) tr Qg Qgs Qgd Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions ID = 1.5 A VDD = 30 V RG = 4.7 VGS = 10 V (Resistive Load, Figure 3) VDD = 48V ID = 3A VGS = 10V Min. Typ. 7 18 10 3.5 3.5 13 Max. Unit ns ns nC nC nC
SWITCHING OFF
Symbol td(off) tf Parameter Turn-off Delay Time Fall Time Test Conditions ID = 1.5 A VDD = 30 V RG = 4.7, VGS = 10 V (Resistive Load, Figure 3) Min. Typ. 17 6 Max. Unit ns ns
SOURCE DRAIN DIODE
Symbol ISD ISDM (*) VSD (*) trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4 A VGS = 0 50 88 3.5 Test Conditions Min. Typ. Max. 4 16 1.3 Unit A A V ns nC A
di/dt = 100A/s ISD = 4 A VDD = 25 V Tj = 150C (see test circuit, Figure 5)
(*)Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. (*)Pulse width limited by safe operating area.
Safe Operating Area
Thermal Impedance
3/8
STN3NF06
Output Characteristics Transfer Characteristics
Transconductance
Static Drain-source On Resistance
Gate Charge vs Gate-source Voltage
Capacitance Variations
4/8
STN3NF06
Normalized Gate Threshold Voltage vs Temperature Normalized on Resistance vs Temperature
Source-drain Diode Forward Characteristics
Normalized Breakdown Voltage vs Temperature.
.
.
5/8
STN3NF06
Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform
Fig. 3: Switching Times Test Circuits For Resistive Load
Fig. 4: Gate Charge test Circuit
Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times
6/8
STN3NF06
SOT-223 MECHANICAL DATA
mm MIN. a b c d e1 e4 f g l1 l2 L 2.9 0.67 6.7 3.5 6.3 3 0.7 7 3.5 6.5 2.27 4.57 0.2 0.63 1.5 TYP. 2.3 4.6 0.4 0.65 1.6 MAX. 2.33 4.63 0.6 0.67 1.7 0.32 3.1 0.73 7.3 3.7 6.7 114.2 26.4 263.8 137.8 248 118.1 27.6 275.6 137.8 255.9 MIN. 89.4 179.9 7.9 24.8 59.1 mils TYP. 90.6 181.1 15.7 25.6 63 MAX. 91.7 182.3 23.6 26.4 66.9 12.6 122.1 28.7 287.4 145.7 263.8
DIM.
L
l2
e1
a b f
d c e4
C
l1
B
C
E
g
P008B
7/8
STN3NF06
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics (R) 2001 STMicroelectronics - All Rights Reserved All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com
8/8

▲Up To Search▲

Price & Availability of STN3NF06

	To Download STN3NF06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .